My Maxon D&S V1 (with the Sustain T knob) the input jack has exploded…problem I found in getting a replacement is that this jack has a smaller diameter around and I don’t want to ream the hole for a modern panel jack.
Anyone know where I can get a suitable replacement or have an extra?
Thanks
Needed replacement input jack for Maxon D&S V1
Moderator: The Captain
- Freed
- Posts: 226
- Joined: Mon Aug 26, 2013 3:09 am
- Location: Tejas
- moose
- Posts: 619
- Joined: Tue Jun 09, 2009 10:03 pm
- Location: Dublin
Re: Needed replacement input jack for Maxon D&S V1
Can you measure the hole? The Lumberg jacks are made for a 9mm hole rather than the usual 10mm for Switchcraft etc.
- simonm
- Posts: 990
- Joined: Fri Aug 29, 2008 12:01 am
- Location: East London, UK
Re: Needed replacement input jack for Maxon D&S V1
is it this? Lumberg KLBPS 3 Jack Socket 6.35mm Chassis Mount 3 Pole Stereo with Break
Japanese part, maybe available from tubesandmore or mouser?
https://www.tubesandmore.com/products/1 ... en-circuit - not exactly the same but same 9mm bushing
Japanese part, maybe available from tubesandmore or mouser?
https://www.tubesandmore.com/products/1 ... en-circuit - not exactly the same but same 9mm bushing
Last edited by simonm on Thu Sep 14, 2023 9:37 pm, edited 1 time in total.
Handmade, high-impact, great-looking radical queer germanium fuzz. A different approach to 1960s-inspired fuzz pedals, no clones, check them out at https://goodfuzzysounds.com or on YouTube https://tinyurl.com/GFS-YT
- simonm
- Posts: 990
- Joined: Fri Aug 29, 2008 12:01 am
- Location: East London, UK
Re: Needed replacement input jack for Maxon D&S V1
double post, doh!
Handmade, high-impact, great-looking radical queer germanium fuzz. A different approach to 1960s-inspired fuzz pedals, no clones, check them out at https://goodfuzzysounds.com or on YouTube https://tinyurl.com/GFS-YT
- moose
- Posts: 619
- Joined: Tue Jun 09, 2009 10:03 pm
- Location: Dublin
Re: Needed replacement input jack for Maxon D&S V1
Just checked the data sheets and they're both 9mm.
Farnell have them here:
https://ie.farnell.com/lumberg/klbp-3/s ... n-Test1573
Farnell have them here:
https://ie.farnell.com/lumberg/klbp-3/s ... n-Test1573
Who is online
Users browsing this forum: No registered users and 1 guest