doing some MKI as well - with little bit of soviet vibes going on :-D
What is on your workbench Tinkerers?
Moderator: The Captain
- The-kangass
- Posts: 106
- Joined: Wed Nov 20, 2019 6:14 pm
- Location: Pilsen - Home of beer and steel
- simonm
- Posts: 985
- Joined: Fri Aug 29, 2008 12:01 am
- Location: East London, UK
Re: What is on your workbench Tinkerers?
nice!
Handmade, high-impact, great-looking radical queer germanium fuzz. A different approach to 1960s-inspired fuzz pedals, no clones, check them out at https://goodfuzzysounds.com or on YouTube https://tinyurl.com/GFS-YT
- Jim Goad
- Posts: 3457
- Joined: Thu Aug 28, 2008 4:23 pm
- Location: Oxfordshire UK
Re: What is on your workbench Tinkerers?
Finally got around to switching pickup positions in my SG Special. It always bugged me that the neck pup was a little hotter than the bridge cos I had to get the bridge pup too close to the strings to get it balanced. Soldered the pickup wire shielding to earth too as originally they were just squashed against the back of a pot.
It's like an orange on a toothpick
- squarewave
- Posts: 1168
- Joined: Wed Aug 27, 2008 3:20 am
Re: What is on your workbench Tinkerers?
Making a 59 junior with my son
Insta @drewcifer01 @lavafangs @andrew_sings_solo
- HorseyBoy
- Posts: 4135
- Joined: Mon Oct 15, 2012 10:48 pm
- Location: Harlan County
Re: What is on your workbench Tinkerers?
Alright - that'll make it a Junior Junior!
- squarewave
- Posts: 1168
- Joined: Wed Aug 27, 2008 3:20 am
Re: What is on your workbench Tinkerers?
Ha ha nice one
Insta @drewcifer01 @lavafangs @andrew_sings_solo
- squarewave
- Posts: 1168
- Joined: Wed Aug 27, 2008 3:20 am
Re: What is on your workbench Tinkerers?
Fuzz face for my buddy’s birthday
Insta @drewcifer01 @lavafangs @andrew_sings_solo
- Dr Tony Balls
- Posts: 2335
- Joined: Wed Aug 17, 2011 3:42 pm
- Location: Brooklyn
Re: What is on your workbench Tinkerers?
No switch?!?
- Jim Goad
- Posts: 3457
- Joined: Thu Aug 28, 2008 4:23 pm
- Location: Oxfordshire UK
Re: What is on your workbench Tinkerers?
Awesome project! Looking forward to seeing how it turns out.
It's like an orange on a toothpick
- squarewave
- Posts: 1168
- Joined: Wed Aug 27, 2008 3:20 am
Re: What is on your workbench Tinkerers?
Of course there is, just not wired it up yet - clear coats need to dry
Insta @drewcifer01 @lavafangs @andrew_sings_solo
Who is online
Users browsing this forum: No registered users and 8 guests