What is on your workbench Tinkerers?

Schematics, layouts & other technical mumbo jumbo.

Moderator: The Captain

Post Reply
User avatar
andy-h-h
Posts: 4
Joined: Wed Apr 08, 2020 10:52 pm
Location: Australia

Re: What is on your workbench Tinkerers?

Post by andy-h-h »

Ready for boxing... old school Fairchild 2n3565 and vintage all sorts to boot - sounds so good. So different to a modern muff. :oldgrin:
Attachments
C198595B-531B-491E-9E27-973C2E229F48.jpeg
C198595B-531B-491E-9E27-973C2E229F48.jpeg (985.39 KiB) Viewed 2558 times
User avatar
squarewave
Posts: 1163
Joined: Wed Aug 27, 2008 3:20 am

Re: What is on your workbench Tinkerers?

Post by squarewave »

Headstock all shaped up and neck glued in.
71B0D4E2-EC28-4813-9189-2D51515F6A8F.jpeg
71B0D4E2-EC28-4813-9189-2D51515F6A8F.jpeg (247.85 KiB) Viewed 2536 times
7EF527AB-70EE-4CD1-A4C1-36F95A96462E.jpeg
7EF527AB-70EE-4CD1-A4C1-36F95A96462E.jpeg (1003.85 KiB) Viewed 2536 times
Insta @drewcifer01 @lavafangs @andrew_sings_solo
User avatar
Dr Tony Balls
Posts: 2330
Joined: Wed Aug 17, 2011 3:42 pm
Location: Brooklyn

Re: What is on your workbench Tinkerers?

Post by Dr Tony Balls »

^that looks fuckin' FUN and RAD.
User avatar
squarewave
Posts: 1163
Joined: Wed Aug 27, 2008 3:20 am

Re: What is on your workbench Tinkerers?

Post by squarewave »

Dr Tony Balls wrote: Mon Jun 29, 2020 3:00 pm ^that looks fuckin' FUN and RAD.
Thank you kind sir. Hope all is well in Brooklyn!
Insta @drewcifer01 @lavafangs @andrew_sings_solo
User avatar
Jim Goad
Posts: 3457
Joined: Thu Aug 28, 2008 4:23 pm
Location: Oxfordshire UK

Re: What is on your workbench Tinkerers?

Post by Jim Goad »

squarewave wrote: Sun Jun 28, 2020 11:04 pm Headstock all shaped up and neck glued in.
Looks lovely! What veneer material is that on the face of the headstock?
It's like an orange on a toothpick
User avatar
fernieite
Posts: 919
Joined: Wed Aug 27, 2008 11:16 pm
Location: Toronto. Age: Early 60s

Re: What is on your workbench Tinkerers?

Post by fernieite »

Maybe not what Squarewave uses, but these ones look quite nice.

https://bartlettguitarparts.com/products/holly-veneer
Great deals with: Stu, Graham, Sickle, Devnulljp, SteveG, peps1, paine, fuzzface6669, jetofuj, sciencefriction, jerms, rafmax, Bigfoot2000, whiskeyfuneral, monolithfuzz.
User avatar
squarewave
Posts: 1163
Joined: Wed Aug 27, 2008 3:20 am

Re: What is on your workbench Tinkerers?

Post by squarewave »

Jim Goad wrote: Tue Jun 30, 2020 4:26 pm
squarewave wrote: Sun Jun 28, 2020 11:04 pm Headstock all shaped up and neck glued in.
Looks lovely! What veneer material is that on the face of the headstock?
It’s a bit of maple that’s been died black (I think 🙃)
Insta @drewcifer01 @lavafangs @andrew_sings_solo
User avatar
pulse.
Posts: 794
Joined: Wed Nov 25, 2009 9:26 pm
Location: Heraklion, Greece

Re: What is on your workbench Tinkerers?

Post by pulse. »

It looks killer! I would love a double cut Jr, a stinger on the back of the headstock would make me drool.
User avatar
squarewave
Posts: 1163
Joined: Wed Aug 27, 2008 3:20 am

Re: What is on your workbench Tinkerers?

Post by squarewave »

Sweet dude, stinger defo would be rad. Getting grain filler into tomorrow and will start to paint on the weekend
Insta @drewcifer01 @lavafangs @andrew_sings_solo
User avatar
Jim Goad
Posts: 3457
Joined: Thu Aug 28, 2008 4:23 pm
Location: Oxfordshire UK

Re: What is on your workbench Tinkerers?

Post by Jim Goad »

squarewave wrote: Tue Jun 30, 2020 10:47 pm
Jim Goad wrote: Tue Jun 30, 2020 4:26 pm
squarewave wrote: Sun Jun 28, 2020 11:04 pm Headstock all shaped up and neck glued in.
Looks lovely! What veneer material is that on the face of the headstock?
It’s a bit of maple that’s been died black (I think 🙃)

Looks great. That’ll be sweet once it’s lacquered.
It's like an orange on a toothpick
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests