Show us your Partscaster...

General discussion, shit shooting, banter and sexual innuendo

Moderator: The Captain

Post Reply
User avatar
DBBlues
Posts: 236
Joined: Tue Jul 22, 2014 1:16 am

Re: Show us your Partscaster...

Post by DBBlues »

Image

This one is a new one for me. It is a '56 Junior that I bought with a non-Gibson P-90 in a space hollowed out for a humbucker, and with a big old chunk of mahogany missing where a Kahler was. So, I had it made into a P-13 Junior and it sounds wonderful.
User avatar
simonm
Posts: 985
Joined: Fri Aug 29, 2008 12:01 am
Location: East London, UK

Re: Show us your Partscaster...

Post by simonm »

P13s are great!
Handmade, high-impact, great-looking radical queer germanium fuzz. A different approach to 1960s-inspired fuzz pedals, no clones, check them out at https://goodfuzzysounds.com or on YouTube https://tinyurl.com/GFS-YT
TeleSoul
Posts: 150
Joined: Thu Nov 08, 2018 12:06 pm

Re: Show us your Partscaster...

Post by TeleSoul »

Man, that is so cool!
User avatar
Lach
Posts: 484
Joined: Wed Apr 27, 2016 11:42 pm

Re: Show us your Partscaster...

Post by Lach »

Dig that!!! I love Juniors
User avatar
DucRyder
Posts: 4334
Joined: Thu Jul 23, 2009 11:50 pm

Re: Show us your Partscaster...

Post by DucRyder »

Bet that jr. sounds killer!
"...Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba…" H.S.T.
User avatar
Jim Goad
Posts: 3457
Joined: Thu Aug 28, 2008 4:23 pm
Location: Oxfordshire UK

Re: Show us your Partscaster...

Post by Jim Goad »

DFADD39D-4103-4742-9A92-903B6C7A7CD9.jpeg
DFADD39D-4103-4742-9A92-903B6C7A7CD9.jpeg (1016.43 KiB) Viewed 402 times
4E335BF7-0314-4626-A8F9-F89E42B0CB32.jpeg
4E335BF7-0314-4626-A8F9-F89E42B0CB32.jpeg (1.14 MiB) Viewed 402 times
Strat made from a Squier affinity neck, Marlin body that came from The Manic Street Preachers’ studio when they auctioned off a bunch of stuff, and electrics are (probably) from a Squier standard. All added up to become a really sweet guitar with no routing or shim needed in the neck pocket.
Avon Rose Morris SG husk came from a joblot. Needed a full refret as the frets were so low, they felt painted on. I dropped Vanson pickups in and a top quality wiring loom with treble bleed, sprague orange drop, CTS etc.

I do loads of partscasters to sell on from joblots I buy. These are 2 of the best.
It's like an orange on a toothpick
User avatar
Jim Goad
Posts: 3457
Joined: Thu Aug 28, 2008 4:23 pm
Location: Oxfordshire UK

Re: Show us your Partscaster...

Post by Jim Goad »

DE4826F0-ECA5-4D7C-9CDB-F2734B251410.jpeg
DE4826F0-ECA5-4D7C-9CDB-F2734B251410.jpeg (1.37 MiB) Viewed 399 times
This was a really fun one. Hohner neck with a trashy 60s acoustic body, pine centre block and Jedson electrics. I miss this guitar!
It's like an orange on a toothpick
User avatar
Laservampire
Posts: 816
Joined: Sat Mar 02, 2013 11:34 pm
Location: Melbourne Australia

Re: Show us your Partscaster...

Post by Laservampire »

I built a friend for my P13 Tele:

Image
Ben
User avatar
DucRyder
Posts: 4334
Joined: Thu Jul 23, 2009 11:50 pm

Re: Show us your Partscaster...

Post by DucRyder »

That's a beauty!
"...Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba…" H.S.T.
User avatar
1bottlerocket
Posts: 8564
Joined: Tue Aug 26, 2008 8:45 pm
Location: The Land of Milk and Honey

Re: Show us your Partscaster...

Post by 1bottlerocket »

Nice.
Never argue with an idiot, they bring you down to their level and beat you with experience
-Garfunk M. Rafferty
_________________________________________
For all things stomp: http://www.effectsdatabase.com/
Big Muff History Page: http://bigmuffpage.com/
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests